home > what's new > featured products
 

MillerEdge Featured Products

MG110

MG110

The small profile of the MG110 sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. With touch sensitive signaling, the MG110 is designed to stop and/or reverse when contact is made.

Specs
Installation

ME120-C5

Sweep Edge (ME120 + ME120-C5)

Miller Edge has taken the operation of the ME120 to a new level. By pairing the ME120 sensing edge with the new ME120-C5 aluminum mounting channel, a sweep edge is formed on the bottom of swing gates. This design is to safeguard the entrapment zone on driveways and curbs along the path of travel.

Specs


Light Curtain

MLC-K36 & MLC-K72

The new Miller Edge Light Curtain is a UL-325 compliant monitored device that
replaces a photo eye and provides extended protection. With the MLC, there is no need for an external control box. Using a series of thru beam photo eyes attached near the door track or guides, this light curtain is designed to provide a dense barrier of light that, when interrupted, signals the door to reverse.

Specs

Installation: •Monitored
•Fail-Safe

ul325_logo

Clima-GUARD

Clima GUARD

Description: The Clima-GUARD safety device combines an ME112 electric sensing edge and a loop seal all in one. The purpose is to provide a weather seal for doors having uneven floors, and to reduce the risk of damaging the sensing edge from over-compression.

Specs
Warranty

AW14-RF

Wireless Air-Wave Switch

AW14-RF is our AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator. There is no need to hardwire coil cords or retracting reels, which saves installation time and improves visual aesthetics.

 

Specs
Installation
Warranty

CPT210 Kit

CPT210 extrusion
Mounting channel
(1) pre-installed wired end plug
(1) non wired end plug
(1) tube of glue

Black

2 conductor
Monitored or Non-monitored
Kit:
14ft-4in or 22ft-4in length CPT210 mounting channel
Kit:
14ft-4in or 22ft-4in length CPT210 mounting channel

Specs
Installation
Warranty

UL mark CE mark

 

MWRT12

MWRT12 Receiver and Transmitter

Includes single channel receiver (MWR12) and transmitter (MWT12). The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.




Specs
Installation
Warranty

MWRTA12

 

MWRTA12 Receiver and Transmitter with Audible Low Battery Alarm

Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm. This feature that activates when the battery has only 25% of its life remaining, indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.  The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

Specs
Installation
Warranty

 

 

 

 



     © MillerEdge Inc., All Rights Reserved :: Sensing Edges | Safety Mats | Photo Optics | Accessories | Custom | Contact Us :: An Effusion Design