home > accessories > transmitter/receiver
 
 

coiling-doors-motorized-safety-DIV 08

Sensing Edge Transmitters & Receivers
The Miller Edge Model gate and door edge transmitter is designed to eliminate the need to hard wire sensing edges
to motor controls. It is easily mounted and wired to the gate or door edge sensor. When the Sensing Edge comes into
contact with an obstruction, a closed circuit signal is created and is sent to the transmitter. The transmitter relays the
signal to the receiver that is wired to the stop or reverse terminals in the motor controls.

     
RB-P-K10C

RB-P-K10C: RB-P-K10C: RBand Monitored Wireless
Door Transmitter and Receiver

The Miller Edge RBand is a wireless, monitored, transmitter/receiver kit built specifically for automated door systems, and it eliminates the need to hardwire Miller Edge Sensing Edges to the operator. Bi-directional communication between the Transmitter and the Receiver improve immunity to RF interference, and onboard diagnostics make setup and troubleshooting hassle-free.

The Miller Edge RBand monitors the presence and function of T2(10k) Miller Edge Sensing Edges, and transmits a wireless, monitored signal to the operator controls. Exclusively available through Miller Edge, the RBand Receiver can be paired with up to 6 TX Transmitters on 2 channels. The Miller Edge RBand RB-G-K10 kit meets the 2016 UL 325 standards for commercial gate operators.

 

Specs
Installation
FAQ

ul325_logo

     
RB-G-K10

RB-G-K10: RBand Monitored Wireless Gate Transmitter and Receiver

The Miller Edge RBand is a wireless, monitored, transmitter/receiver kit built specifically for automated gate systems, and it eliminates the need to hardwire Miller Edge Sensing Edges to the operator. Bi-directional communication between the Transmitter and the Receiver improve immunity to RF interference, and onboard diagnostics make setup and troubleshooting hassle-free.

The Miller Edge RBand monitors the presence and function of T2(10k) Miller Edge Sensing Edges, and transmits a wireless, monitored signal to the operator controls. Exclusively available through Miller Edge, the RBand Receiver can be paired with up to 6 TX Transmitters on 2 channels. The Miller Edge RBand RB-G-K10 kit meets the 2016 UL 325 standards for commercial gate operators.

 

Specs
Installation
FAQ

ul325_logo

 
MWRT12B

MWRT12B
Single-Channel Wireless System

Avoid visible cords and reels with this non-monitored single-channel edge system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this reliable system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases.

Specs
Installation
FAQ

 
MWRTA12B

MWRTA12B
Single-Channel Wireless System with Low Battery Alarm

Avoid visible cords and reels with this non-monitored single-channel edge system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this reliable system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases. The transmitter features an audible alarm that activates when the battery has 25% of its life remaining.

Specs
Installation
FAQ

 
MWR22B, MWT12B, MWTA12B

MWR22B, MWT12B, MWTA12B
Two-Channel Wireless System with Optional Low Battery Alarm

Avoid visible cords and reels with this non-monitored wireless system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this two-channel edge system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that  allow for easy troubleshooting. The transmitter is available with an optional audible alarm that activates when the battery has  25% of its life remaining.

Specs
Installation
FAQ

 
ANT-R

ANT-R: Rigid Antenna, Insulated

Use to increase signal reception when needed.

 

 

 

 

 
 
 
MEL-II: Discontinued — but still supported.
adobe pdf
Specifications Installation FAQ

 
MEL-I: Discontinued — but still supported.
adobe pdf
Specifications Installation FAQ

The MEL-II replaces this model.

ANT-K Antenna Cable: Discontinued

 

 
MGL-K20: Discontinued — but still supported.
adobe pdf
Specifications Installation    

The RBand replaces this model.
 
adobe pdf
Specifications Installation FAQ
MWRT12, MWRTA12: Discontinued – but still supported.
 
MWR13, MWT12, MWTA12
Speadobe pdfcifications Installation FAQ

Discontinued – but still supported.
 
 
s



     © MillerEdge Inc., All Rights Reserved :: Sensing Edges | Safety Mats | Photo Optics | Accessories | Custom | Contact Us :: An Effusion Design